All of our coatings are powder coatings, meaning they are applied by an electrostatic process, then baked at 400 °F to cure into the finish coat. The first coat, after sandblasting and phosphate, is an epoxy primer. This is applied and baked to cure; then the topcoat, a polyester, is applied and baked to cure. Two separate coats. Two separate cure cycles in the 400 °F oven.

All of our finish coatings are warranted for two years against paint failure. This does not cover chips and scratches. This is a Powder Coat Tuff warranty. This warranty is f.o.b. the Portland manufacturing location.

​Our color chart and samples represent as close of example to the finish coat as we can get. Final coat may vary 10% plus or minus.